Cisco ISR 4351 (3GE3NIM2SM4G FLASH4G DRAM IPB) ISR4351/K9
Giá: Liên hệ
Giới thiệu:
Bộ định tuyến dịch vụ tích hợp Cisco 4351 hỗ trợ 3 khe mô đun giao diện mạng (NIM), cung cấp 200 Mbps đến 400 Mbps lưu lượng.
Figure 1 shows the appearance of Cisco ISR4351/K9.
Note:
·The router fan tray is hidden behind the removable bezel.
·LEDs include ten indicators.
Table 2 shows the LED descriptions.
Figure 3 shows the back panel of Cisco ISR4351/K9.
Note:
·The NIMs support 2 single-wide or 1 double-wide.
Product Details
Figure 2 shows the front panel of Cisco ISR4351/K9.Note:
① | Power supply unit | ③ | Router power On/Off switch |
② | Router fan tray | ④ | LEDs |
·LEDs include ten indicators.
Table 2 shows the LED descriptions.
LEDs | Represents | Color | Description |
PSU0 | Power Supply Unit (P0 and P1) Status | Green | PSU is on and is providing power. |
Amber | PSU is on but with errors or in a failure condition. | ||
Off | Power supply is turned off. | ||
POE0 | POE PSU | Green | PoE is on and providing power. |
Amber | PoE is in a failed condition. | ||
Off | PoE supply is not present. | ||
GE POE | Internal PoE Daughter Card Status | Green | PSU is installed and providing power |
Amber | PSU is installed but in a failure condition. | ||
Off | PSU is off. | ||
FLASH | System Flash Status | Blinking Green | Compact flash/eUSB flash is present and currently being accessed. |
TEMP | Temperature Status | Solid green | All temperature sensors in the system are within acceptable range. |
Amber | One or more temperature sensors in the system are outside the acceptable range. | ||
Off | Temperature is not being monitored. | ||
PWR | System Power | Green | System power is on and functioning correctly. |
Green blinking | System power is in the process of shutting down. | ||
Amber | System power is up, but low level initialization failed. | ||
Amber blinking | System power is up, but the system failed to come out of reset. | ||
Off | System power is off. | ||
SSD | mSATA Slot Status | Green | SSD mSATA is present and enabled. |
Amber | Initialized with error. | ||
Off | Not present. | ||
ISC | ISC Slot Status | Green | PVDM4 is present and enabled. |
Amber | Initialized with error. | ||
Off | Not present. | ||
FAN | Fan Status | Green | All fans are operating. |
Amber | One fan has stopped working. | ||
Blinking Amber | Two or more fans have stopped working, or the fan tray has been removed. | ||
Off | Fans are not being monitored. | ||
STAT | System Status | Solid green | System operating normally. |
Blinking amber | BIOS/Rommon is booting. | ||
Amber | BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. | ||
Off | System is not out of reset or BIOS image is not loadable. |
Figure 3 shows the back panel of Cisco ISR4351/K9.
Note:
① | USB Type A port | ⑦ | SFP port (GE 0/0/0) |
② | GE management port | ⑧ | RJ-45 port (GE/0/0/2) |
③ | USB Type B mini port | ⑨ | NIM slots |
④ | Auxiliary port | ⑩ | Ground connection |
⑤ | Console port | ⑪ | Enhanced Service Module (SM-X) slot |
⑥ | RJ-45 port (GE 0/0/1) |
Table 1 shows the Quick Specs.
Product Code | Cisco ISR4351/K9 |
Aggregate Throughput | 200 Mbps to 400 Mbps |
Total onboard WAN or LAN 10/100/1000 ports | 3 |
RJ-45-based ports | 3 |
SFP-based ports | 3 |
Enhanced service-module (SM-X) slot | 2 |
NIM (Network Interface Modules) slots | 3 |
Onboard ISC slot | 1 |
Memory | 4 GB (default) / 16 GB (maximum) |
Flash Memory | 4 GB (default) / 16 GB (maximum) |
Power-supply options | Internal: AC, DC (roadmap), and PoE |
Rack height | 2 RU |
Dimensions (H x W x D) | 43.9 x 438.15 x 507.2 mm |
The Modules, Cards, Licenses & Accessories
Cisco ISR4351/K9 is one of the Cisco 4000 series routers, which support new modules & cards slots, such as NIM, ISC, etc. Besides, Cisco ISR4351/K9 can upgrade by licenses.Table 3 shows some recommended modules, cards, licenses and several cables.
Items | Models | Descriptions |
Smart Serial Cables | CAB-SS-449FC | Cisco CAB-SS-449FC RS-449 Cable, DCE Female to Smart Serial, 10 Feet |
CAB-SS-V35FC | Cisco CAB-SS-V35FC V.35 Cable, DCE Female to Smart Serial, 10 Feet | |
Console and Auxillary Cables | CAB-AUX-RJ45 | Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
CAB-ETH-S-RJ45 | Cisco Router Cable CAB-ETH-S-RJ45 | |
CAB-CONSOLE-RJ45 | Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F | |
CAB-CONSOLE-USB | Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B | |
Licenses | L-SL-4350-APP-K9= | Cisco AppX license L-SL-4350-APP-K9= with 1300 conns/ISRWAAS or vWAAS for ISR4351 |
Network Interface Modules | NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module | |
NIM-4E/M | Analog voice network interface card (ear and mouth) | |
NIM-2FXS | Cisco Analog voice network interface card NIM-2FXS | |
NIM-2FXS/4FXO | Cisco Analog voice network interface card NIM-2FXS/4FXO | |
NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module | |
SFPs for On-Board GE Ports | GLC-SX-MMD | Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
GLC-LH-SMD | Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM | |
GLC-ZX-SMD | Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Models | ISR4451-X/K9 | ISR4431/K9 | ISR4351/K9 | ISR4331/K9 | ISR4321/K9 |
Aggregate Throughput | 1 Gbps to 2 Gbps | 500 Mbps to 1 Gbps | 200 Mbps to 400 Mbps | 100 Mbps to 300 Mbps | 50 Mbps to 100 Mbps |
Total onboard WAN or LAN 10/100/1000 ports |
4 | 4 | 3 | 3 | 2 |
RJ-45-based ports | 4 | 4 | 3 | 2 | 2 |
SFP-based ports | 4 | 4 | 3 | 2 | 1 |
Enhanced service-module slots | 2 | 0 | 2 | 1 | 0 |
NIM slots | 3 | 3 | 3 | 2 | 2 |
Onboard ISC slot | 1 | 1 | 1 | 1 | 1 |
Rack height | 2 | 1 | 2 | 1 | 1 |
Bảo hành 12 tháng.
Cisco Integrated Services Routers 4000 Series Datasheet vui lòng tải tại đây.